In-depth technical answers on civil shaft dimensions, single-phase power, Automatic Rescue Devices (ARD), society CAMC migrations, and statutory safety licensing across Noida & Delhi NCR.
For Machine-Room-Less (MRL) commercial passenger lifts, a pit depth of 1200mm to 1500mm and overhead headroom of 3800mm to 4200mm above the top landing is standard.
For residential home and villa lifts, our specialized compact engineering requires as little as 150mm pit depth (or zero pit with a 2-inch floor ramp) and only 2800mm overhead headroom, eliminating deep excavation and structural waterproofing challenges.
Yes. FTA Lifts manufactures dedicated residential villa elevators equipped with energy-saving VVVF regenerative vector drives that run on standard 220V single-phase domestic power. During active travel, the lift draws roughly 1.5 to 2.2 kW — comparable to a standard household microwave or 1.5-ton split air conditioner. You do not need to apply for expensive commercial 3-phase high-tension electricity.
Yes. We provide precision-engineered self-supporting structural glass and aluminium/steel shafts. These standalone frameworks can be anchored inside an existing open staircase void, cut through interior floor slabs, or erected against an exterior balcony facade. They require zero heavy civil masonry and can be assembled cleanly in 5 to 7 days.
An Automatic Rescue Device (ARD) is an emergency solid-state electronic control unit connected to high-amperage sealed maintenance-free batteries. The instant utility electricity is cut:
Every installation incorporates multi-layer failsafes complying with European EN-81 codes:
Yes. Many housing societies and commercial towers across Noida, Greater Noida, and Gurgaon switch their maintenance contracts to FTA Lifts to escape exorbitant OEM renewal rates and slow service response queues.
Our senior service engineers have over 20 years of hands-on multi-brand experience. We stock genuine compatible parts for all major global makes and can transition your building under our Comprehensive CAMC with an immediate free pre-inspection audit.
Under Uttar Pradesh and Delhi lift acts, elevators must be inspected and certified annually by the Government Electrical Inspectorate. FTA Lifts conducts mandatory 25-point pre-inspection audits, static and dynamic load testing, electrical megger insulation testing, and provides all required engineering documentation and liaison to ensure your building's NOC is granted without penalty or delay.
Our senior engineering department is available for free site visits, shaft layout reviews, and RWA committee presentations.